Vol. 13 (2019)
Table of Contents
| TRANSIENT MODELLING OF AN EV INVERTER HEAT SINK WITH PCM | |
|
Bradley Glenn Orra ,
Randeep Singha ,
Thanh-Long Phana ,
Masataka Mochizukib a Fujikura Ltd, Japan b The Heat Pipes, Japan |
Frontiers in Heat and Mass Transfer (FHMT) 13 -
1
(2019)
|
| FLOW CHARACTERISTICS OF WET NATURAL GAS IN DIFFERENT THROTTLING DEVICES | |
|
Xuewen Cao ,
Qi Chu ,
Xiaodan Song ,
Yuxuan Li ,
Jiang Bian Shandong Provincial Key Laboratory of Oil & Gas Storage and Transportation Safety, China |
Frontiers in Heat and Mass Transfer (FHMT) 13 -
2
(2019)
|
| NATURAL CONVECTION OF NANOFLUIDS PAST AN ACCELERATED VERTICAL PLATE WITH VARIABLE WALL TEMPERATURE BY PRESENCE OF THE RADIATION | |
|
H. Astutia ,
P. Srib ,
S. Kaprawia a Universitas Sriwijaya, Indonesia b Guna Darma University, Indonesia |
Frontiers in Heat and Mass Transfer (FHMT) 13 -
3
(2019)
|
| THERMAL ANALYSIS OF HEAT TRANSFER ENHANCEMENT OF RIB HEAT SINK FOR CPU | |
|
Ming Zhao ,
Yang Tian University of Shanghai for Science and Technology, China |
Frontiers in Heat and Mass Transfer (FHMT) 13 -
4
(2019)
|
| INVESTIGATIONS OF WIRE-BONDED MICRO HEAT PIPES - A REVIEW | |
|
C. B. Sobhana ,
G.P. Petersonb a National Institute of Technology, India b Georgia Institute of Technology, United States |
Frontiers in Heat and Mass Transfer (FHMT) 13 -
5
(2019)
|
| MHD FLOW IN A CIRCULAR HORIZONTAL PIPE UNDER HEAT SOURCE/SINK WITH SUCTION/INJECTION ON WALL | |
|
G. Nagarajua ,
Mahesh Garvandhab ,
J.V. Ramana Murthyc a Lebanese French University, Iraq b GITAM university, India c NIT Warangal, India |
Frontiers in Heat and Mass Transfer (FHMT) 13 -
6
(2019)
|
| NUMERICAL AND EXPERIMENTAL INVESTIGATIONS OF NATURAL CONVECTIVE HEAT TRANSFER FROM TWO-SIDED DIAGONALLY INCLINED SQUARE PLATES HAVING A FINITE THICKNESS | |
|
Rafiq Manna ,
Patrick H. Oosthuizen Queen's University, Canada |
Frontiers in Heat and Mass Transfer (FHMT) 13 -
7
(2019)
|
| OPERATING CHARACTERISTICS OF NAPHTHALENE HEAT PIPES | |
|
B. Orra ,
R. Singha ,
A. Akbarzadehb ,
Masataka Mochizukic a Fujikura Ltd, Japan b RMIT University, Australia c The Heat Pipes, Japan |
Frontiers in Heat and Mass Transfer (FHMT) 13 -
8
(2019)
|
| TURBINE BLADE LEADING EDGE IMPINGEMENT COOLING FROM NORMAL OR TANGENTIAL JETS WITH CROSSFLOW EFFECT | |
|
Nian Wang ,
Mingjie Zhang ,
Sulaiman Alsaleem ,
Lesley M. Wright ,
Je-Chin Han Texas A&M University, United States |
Frontiers in Heat and Mass Transfer (FHMT) 13 -
9
(2019)
|
| EFFECT OF ABSORBER TYPES OF CONVENTIONAL DISTILLERS ON THE AMOUNT OF DISTILLED WATER PRODUCTION | |
|
M. Mirmanto ,
M. Wirawan ,
I.M. A. Sayoga ,
S. Syahrul ,
M. Faisal ,
A. Abdullah Mataram University, Indonesia |
Frontiers in Heat and Mass Transfer (FHMT) 13 -
10
(2019)
|
| STUDY ON HEAT AND MASS TRANSFER WITH HEAT AND MASS AND NONLINEAR CHARACTERISTICS SOURCE IN CAVITY | |
|
Yubing Lia ,
Mo Yanga ,
Jian Lib ,
Zhiyun Wanga a University of Shanghai for Science and Technology, China b Commercial Aircraft Corporation of China, Ltd., China |
Frontiers in Heat and Mass Transfer (FHMT) 13 -
11
(2019)
|
| REVIEW OF VARIOUS THIN HEAT SPREADER VAPOR CHAMBER DESIGNS, PERFORMANCE, LIFETIME RELIABILITY AND APPLICATION | |
|
Masataka Mochizukia ,
Thang Nguyenb a The Heat Pipe, Japan b Fujikura Ltd, Australia |
Frontiers in Heat and Mass Transfer (FHMT) 13 -
12
(2019)
|
| THERMAL TOPOLOGY OPTIMIZATION DESIGN OF SPINDLE STRUCTURE WITH A HYBRID CELLULAR AUTOMATON METHOD | |
|
Xiaolei Denga ,
Jin Wangb ,
Hongcheng Shena ,
Jinyu Zhoua ,
Jianchen Wanga ,
Changxiong Xiea ,
Jianzhong Fuc a Quzhou University, China b Southwest Petroleum University, China c Zhejiang University, China |
Frontiers in Heat and Mass Transfer (FHMT) 13 -
13
(2019)
|
| INFLUENCE OF MHD ON FREE CONVECTION OF NON-NEWTONIAN FLUIDS OVER A VERTICAL PERMEABLE PLATE IN POROUS MEDIA WITH INTERNAL HEAT GENERATION | |
|
Heng-Pin Hsua ,
Chuo-Jeng Huangb ,
Her-chang Aya a National Kaohsiung University of Science and Technology, Taiwan b Air Force Institute of Technology, Taiwan |
Frontiers in Heat and Mass Transfer (FHMT) 13 -
14
(2019)
|
| EFFECTS OF NON-UNIFORM SLOT SUCTION/INJECTION AND CHEMICAL REACTION ON MIXED CONVECTIVE MHD FLOW ALONG A VERTICAL WEDGE EMBEDDED IN A POROUS MEDIUM | |
|
M. Ganapathiraoa ,
Ali J. Chamkhab ,
N. Srinivasa Raoc a NIIT University, India b Prince Mohammad Bin Fahd University, Saudi Arabia c Vignan's Foundation for Science, Technology and Research, India |
Frontiers in Heat and Mass Transfer (FHMT) 13 -
15
(2019)
|
| WALL HEAT FLUX PARTITIONING ANALYSIS FOR SUBCOOLED FLOW BOILING OF WATER-ETHANOL MIXTURE IN CONVENTIONAL CHANNEL | |
|
B.G. Suhasa ,
A. Sathyabhamab ,
Kavadiki Veerabhadrappaa ,
U. Suresh Kumara ,
U. Kiran Kumara a BMS College of Engineering, India b NITK, India |
Frontiers in Heat and Mass Transfer (FHMT) 13 -
16
(2019)
|
| MECHANICALLY DRIVEN OSCILLATING FLOW COOLING LOOPS – A REVIEW | |
|
M.D. Alam ,
O.T. Popoola ,
Y. Cao Florida International University, United States |
Frontiers in Heat and Mass Transfer (FHMT) 13 -
17
(2019)
|
| AN ITERTIVE DESIGN METHOD TO REDUCE THE OVERALL THERMAL RESISTANCE IN A CONJUGATE CONDUCTION-FREE CONVECTION CONFIGURATION | |
|
Chadwick D. Sevart ,
Theodore L. Bergman University of Kansas, United States |
Frontiers in Heat and Mass Transfer (FHMT) 13 -
18
(2019)
|
| A CHEBYSHEV SPECTRAL METHOD FOR HEAT AND MASS TRANSFER IN MHD NANOFLUID FLOW WITH SPACE FRACTIONAL CONSTITUTIVE MODEL | |
|
Shina D. Oloniiju ,
Sicelo P. Goqo ,
Precious Sibanda University of KwaZulu–Natal, South Africa |
Frontiers in Heat and Mass Transfer (FHMT) 13 -
19
(2019)
|
| PHYSICAL HEAT TRANSFER | |
|
Hai-Dong Wang ,
Zeng-Yuan Guo Tsinghua University, China |
Frontiers in Heat and Mass Transfer (FHMT) 13 -
20
(2019)
|
| EXPERIMENTAL INVESTIGATION AND MATHEMATICAL MODELING OF CONVECTIVE DRYING KINETICS OF WHITE RADISH | |
|
Abhishek Dasorea ,
Ramakrishna Konijetia ,
Naveen Puppalab a Koneru Lakshmaiah Education Foundation, India b New Mexico State University, United States |
Frontiers in Heat and Mass Transfer (FHMT) 13 -
21
(2019)
|
| POWER LOSS IN MULTISCALE MASS TRANSFER | |
|
Yongbin Zhang Changzhou University, China |
Frontiers in Heat and Mass Transfer (FHMT) 13 -
22
(2019)
|
| FLOW AND HEAT TRANSFER CHARACTERISTICS OF AIR IN SQUARE CHANNEL HEAT EXCHANGER WITH C-SHAPED BAFFLE: A NUMERICAL STUDY | |
|
Amnart Boonloia ,
Withada Jedsadaratanachaib a King Mongkut’s University of Technology North Bangkok, Thailand b King Mongkut’s Institute of Technology Ladkrabang, Thailand |
Frontiers in Heat and Mass Transfer (FHMT) 13 -
23
(2019)
|
| DATA CENTER ENERGY CONSERVATION BY HEAT PIPE BASED PRE-COOLER SYSTEM | |
|
Randeep Singh ,
Masataka Mochizuki ,
Koichi Mashiko ,
Thang Nguyen Fujikura Ltd., Japan |
Frontiers in Heat and Mass Transfer (FHMT) 13 -
24
(2019)
|
| EFFECT OF CYLINDER DIAMETER ON STATE QUANTITIES FOR IRREVERSIBLE PROCESS IN PISTON-CYLINDER SYSTEM | |
|
Siti Nurul Akmal Yusofa ,
Yutaka Asakoa ,
Mohammad Faghrib ,
Lit Ken Tana ,
Nor Azwadi bin Che Sidika ,
Wan Mohd Arif bin Aziz Japara a University Technology Malaysia, Malaysia b University of Rhode Island, United States |
Frontiers in Heat and Mass Transfer (FHMT) 13 -
25
(2019)
|
| NUMERICAL ANALYSES ON VAPOR PRESSURE DROP IN A CENTERED-WICK ULTRA-THIN HEAT PIPE | |
|
Yasushi Koito Kumamoto University, Japan |
Frontiers in Heat and Mass Transfer (FHMT) 13 -
26
(2019)
|
| INFLUENCE OF THE FLUID-WALL INTERACTION ON THE MULTISCALE FLOW THROUGH A MICRO SLIT PORE CONSIDERING THE ADSORBED LAYER-FLUID INTERFACIAL SLIPPAGE | |
|
Yongbin Zhang Changzhou University, China |
Frontiers in Heat and Mass Transfer (FHMT) 13 -
27
(2019)
|
| INFLUENCE OF RING SIZE AND LOCATION ON FLOW TOPOLOGY, HEAT TRANSFER STRUCTURE AND THERMAL EFFICIENCY IN HEAT EXCHANGER SQUARE CHANNEL PLACED WITH 30-DEGREE INCLINED SQUARE RING | |
|
Amnart Boonloia ,
Withada Jedsadaratanachaib a King Mongkut’s University of Technology North Bangkok, Thailand b King Mongkut’s Institute of Technology Ladkrabang, Thailand |
Frontiers in Heat and Mass Transfer (FHMT) 13 -
28
(2019)
|
| EFFECT OF SEMI-CIRCLE RIB ON HEAT TRANSFER COEFFICIENT IN A RECTANGULAR CHANNEL | |
|
Riyadh S. Al-Turaihia ,
Doaa Fadhila ,
Azher M. Abedb a University of Babylon, Iraq b Al-Mustaqbal University College, Iraq |
Frontiers in Heat and Mass Transfer (FHMT) 13 -
29
(2019)
|
| STUDY OF THERMAL AND MECHANICAL PROPERTIES OF FIBER-GLASS MULTI-WALL CARBON NANOTUBE/EPOXY | |
|
Luay Hashem Abbuda ,
Hyder H. Ballab ,
Ammar F. Abdulwahidc ,
Zaid Sttar Karimc a Al-Mustaqbal University College, Iraq b Al-Furat Al-Awsat Technical University, Iraq c University of Kufa, Iraq |
Frontiers in Heat and Mass Transfer (FHMT) 13 -
30
(2019)
|
ISSN: 2151-8629