Table of Content

Open Access iconOpen Access

ARTICLE

RESEARCH ON APPLICATION OF HEAT OF BLAST FURNACE SLAG WATER IN MULTI-EFFECT DESALINATION

Fuyong Sua,* , Guozhi Zhangb, Guojun Chenc

a School of Energy and Environmental Engineering, University of Science and Technology Beijing, Beijing 100083, China
b Cold rolling plant, Baoshan Iron & Steel Co., Ltd., Shanghai, 201900, China
c Baosteel Central Research Institute, Baoshan Iron & Steel Co.,Ltd, Shanghai, 201900, China

* Corresponding Author: Email: email

Frontiers in Heat and Mass Transfer 2020, 15, 1-5. https://doi.org/10.5098/hmt.15.4

Abstract

The iron and steel industry produces a large number of low-grade waste heat resources, which are not fully utilized. In addition, the iron and steel industry consumes a lot of water. This paper presents a method of utilizing waste heat of blast furnace slag flushing water for seawater desalination. After the flash process, heat exchange process and heat repair process, the blast furnace slag water was converted into steam which is 70 °C, which provided a heat source for MED (Multi-effect Desalination). This utilization method of waste heat was verified by thermodynamics and production data.

Keywords


Cite This Article

Su, F., Chen, G. (2020). RESEARCH ON APPLICATION OF HEAT OF BLAST FURNACE SLAG WATER IN MULTI-EFFECT DESALINATION. Frontiers in Heat and Mass Transfer, 15(1), 1–5.



cc This work is licensed under a Creative Commons Attribution 4.0 International License , which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
  • 292

    View

  • 222

    Download

  • 0

    Like

Share Link